Home News Content

Several Effective Methods Of Controlling Energy Consumption Of Chillers

Mar 19, 2018

Several Effective Methods of Controlling Energy Consumption of Chillers


Every spring and summer season, the temperature starts to rise, and the number and time of the use of industrial chillers will be more than in autumn and winter. This also means that the energy consumption of users in the use of industrial chillers will be even greater. In order to save the use cost of industrial chillers, this requires users to learn to control their energy consumption when using industrial chillers. Next, we will teach you several effective ways to control energy consumption.


First, provide a good electricity environment


To reduce the energy consumption of industrial chillers, it is first necessary to provide a good electrical environment for industrial chillers. For example, the voltage of the electricity environment is relatively low. In order to maintain stable operating efficiency, the industrial chiller equipment will inevitably increase the consumption of electrical energy. The excessively high voltage will inevitably lead to the operation failure of the industrial chiller. The ability to provide safe voltage use conditions for industrial ice water machines is a basic condition for reducing the energy consumption of industrial chillers, a suitable voltage environment, and effectively reducing the energy consumption of industrial chillers.


Second, the development of specific equipment operation plan


If you want to control the performance of industrial chillers and maintain the safety and stability of the system, you need to formulate a specific use plan. If there is no specific plan for any equipment, it will put the system in a state of overload, which will seriously affect the industrial chiller. the quality of.


Third, regular repairs


Regular maintenance and repair of industrial chillers can maintain the stability of industrial chillers, which will reduce the effectiveness of any equipment without maintenance and repair. Of course, this maintenance is purposeful maintenance, for example, it can start from the system. As long as the maintenance work is done well, the equipment can be used better and the efficiency will be greatly improved.


Fourth, pay attention to the surrounding operating environment


As the environmental impact on industrial chillers is relatively large, we must pay attention to the environmental impact of industrial chillers while guaranteeing quality. We must not affect the environment when using them.


Fifth. Condensation temperature


Under the premise of satisfying the use, the condensing temperature must be reduced, because at the beginning of use, there will be a certain margin in the cooling tower, so it is necessary to increase the original cooling tower water, so that the cooling water performance is better.


Sixth, configuration adjustable coil


When the industrial chiller is in operation, if it takes a long time, energy consumption is very high. The adjustment coil can be installed for the industrial chiller, and the appropriate operating power can be adjusted according to the ambient temperature, for example, the industrial chiller can be cooled within 70% of the operating power range, and at least 15% of energy can be saved.


The energy consumption of the industrial chiller corresponds to the operating power, and the method of adjusting the operating power of the industrial chiller can be grasped, and the operating power of the industrial chiller can be controlled under the premise of meeting the operational requirements of the enterprise. Controlling industrial chillers in an inefficient operation can reduce the amount of energy consumed by equipment.