Modular 100 Ton 350 Kw Air Cooled Screw Water Chiller Cooling System With Hanbell Compressor has a simple structure, fewer moving parts and less wearing parts. It is only 1/10 of the piston type, with low failure rate and long service life.
The circular motion is stable, there is no surge phenomenon during low load operation, low noise and low vibration.
It is easy to adjust, can be steplessly adjusted within the range of 10%-100%, high efficiency at partial load, and significant power saving.
Its small size and light weight make it an established fully enclosed large capacity unit and is not sensitive to wet strokes.
It is operated under positive pressure and there is no problem of intrusion of outside air.
Specification / Supplier
Temp Outlet (℃)
Semi-hermetic screw type
Shell and Tube / 1set
Cold water flow（m3/h）
Installation and maintenance
Modular 100 Ton 350 Kw Air Cooled Screw Water Chiller Cooling System With Hanbell Compressor can be installed on a building roof or other well ventilated environment without the need for an additional cooling water system.
It is recommended to use multiple units in parallel during transportation, lifting and installation.
The unit should be kept dry and ventilated, and the surrounding air should not contain corrosive substances, so as to avoid close proximity to chimneys, generators, boilers, etc. where acid gas or heat is easily generated.
In order to prevent the bottom of the unit from rusting, it is better to use the cross steel frame to support the bottom of the unit during installation, so that the unit is not less than 20cm away from the ground.