Modular 40ton 50HP Industrial Water Cooled Water Cooling Chiller

Modular 40ton 50HP Industrial Water Cooled Water Cooling Chiller

Modular 40ton 50HP Industrial Water Cooled Water Cooling Chiller Product Description: Anyda series of water cooled industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The...

Product Details

Modular 40ton 50HP Industrial Water Cooled Water Cooling Chiller


Product Description:

Anyda series of water cooled industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surrounding factors. Therefore they are necessary good equipments in modern industry.
1. Cooling temperature range 5-35 degrees

2.High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3. Tube-in-shell condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping water tank.
5.R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump.
8. Independent temperature controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.

10. Warm-keeping design for all piping to avoid partial convection.
11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.

 
Applied Machinery: Cooling system of oil temperature, ultrasonic, high frequency machinery,injection molding machinery,  blow molding machinery.

ItemSpecification / Supplier
Cooling capacityModelAYD-50W
kw/h165
Power inputkw43.23
Power supply380V-3N-50HZ
Temp Outlet (ºC)7
refrigerant controlExpansion valve
Refrigeration circlefour
refrigerantR22
Dimension(mm)L×W×H2200*1500*1900
CompressorStyleScroll
Quantity(set)4
Compressor Power(kw)37.4
CondenserStyleShell and Tube /  1set
Pipe size(DN)80
Cooling tower flow(m3/h)33.5
EvaporatorStyleShell and Tube /  1set
Cold water flow(m3/h)27.5
Pipe size(DN)80
Water Tank(L)500
Pump Power(kw/h)3.75
Protector Device1,Phase protector
2,Fan overload protector
3,High/low voltage protector
4,overheat protector
5,Anti-freeze protector
Unit Weight(kg)1500
Operating Weight(kg)1800
Main  Parts
CompressorPanasonic
ElectronicLS  /  Carlo
Electromagnetically valveEmerson
Expansion ValveEmerson
Electrical controlPunp

 

40 ton water cooled chiller

50 hp water cooled chiller




FAQ:

1.How does a chiller system work?

   Chiller has two circulation,one is process water circulation,the other is refrigerant gas circulation.Heat picked up from the process.Heat transfers to refrigerant circulation.Heat is remove to air or water.

2.How to calculate cooling capacity for chillers
   Cooling Capacity(kw)= Flow Rate(m3/h)*Temp Change(T1-t2)/0.86

   Heat Load= C(specific heat)* M(quality output per hour )*Temp Change(T1-T2)

3.Types of chiller system?

   Air Cooled Chiller and Water Cooled Chiller.Water cooled chiller needs a separated cooling tower and has a higher efficiency,but less easier than air cooled.

4.Cooling capacity unit conversion?

1 kcal/h = 1.163W,1 W = 0.8598 kcal/h; 

1 Btu/h = 0.2931W,1 W = 3.412 Btu/h; 

1 USRT = 3.517 kW,1 kW = 0.28434 USRT;  

1 kcal/h = 3.968 Btu/h,1 Btu/h = 0.252 kcal/h; 

1 USRT = 3024 kcal/h,10000 kcal/h = 3.3069 USRT; 
5.This chiller could do heat recovery?
    Yes,please kindly send us the temp and water volume per hour.

6.Chiller maintenance?

Step 1: Keep Tubes Clean
Step 2: Ensure a Leak-free Unit
Step 3: Sustain Proper Water Treatment(prevent scale, corrosion)
Step 4: Analyze Oil and Refrigerant

Why Choose Us?

1.Reply your inquiry within 12 working hrs.
2.Strong R&D team,more than 15 years of manufacturing chiller experience. OEM&ODM is welcomed.
3.Direct factory,offer customer competitive price with high quality chiller.
4.Strict quality control system,professional QC team.


ANYDA is well acknowledged as one of the leading manufacturers of modular 40ton 50hp industrial water cooled water cooling chiller in China. All of the products for sale are made in our professional plant. Should you're interested in it, please be free to get the high-tech equipment with competitive price from us.
Previous:50 Kw 15 Hp Water Cooled Cooling Tower Chiller Next:100 Kw Industrial Air Cooled Water Chiller Used In Plastic

Inquiry